So with this in mind I've started to create a 4x4 Board which I'm basing on an industrial style. The buildings are card stock Mars system done by World Works and are very robust. they are printed on 200gsm card and as they all have interiors its makes them pretty solid. I've also on the bottom used thicker card as a stiffener for the floor.
Some of the buildings with roof on and an Infinity model for scale.
As I've had the time I've been adding more elements to the buildings to break them up or I've been adding different sized buildings as well.
The hardest building to date has been a 2 story Factory/Repair building. A single story isn't that hard. It might take me 2hrs to print, cut fold, glue everything together. With the two story it took a lot longer because of the size and how the upper structure went together.
Lower Floor
Completed with the top and roof added. I have some ladders I plan to add to this and maybe a section of walkway on one side. But don't want to make life too easy for people.
Here's some images of the board with crates etc.
Some Table Layouts to date.
Let me know your thoughts, comments etc always greatly recieved.
