Scarecrow's Nomads (Corriegdor)

[Scarecrow]

Well i had a spare Alguacil floating around here that I got as part of a prize in a tourney, so thought I give it a test paint. I also tried to do speed painting for this guy, to see what I could achieve. For 2 hours of work, I was pretty happy.

[Magno]

That's pretty good. That's the inverse of how I want to paint my corregidor minis. The back of the Alguacil looks pretty damn awesome.

[Maru]

i c you get the idea ow white dots on Toohaa and now you know where and how not to over do them

[ork56]

Very neat work and the pose and base complement each other well.

[Arachas]

I would say that is VERY nice work for two hours. Or four hours. Or generally speaking!

[Scarecrow]

Cheers guys. For anyone interested, colours/process as follows:

- Prime Black
- airbrush VMC Luftwaffe Uniform WW2 from the top with a wider angle
- Airbrush VMC French Mirage Blue directly from the top
- Edge highlight the black in the above two colours, with a final highlight of VGC Wolf Grey
- Red sections are GW Mechrite Red, then VGC Hot Orange and finally VGC Firey Orange
- Weapons are VMC Neutral Grey, then paint VMC Sky Grey leaving VMC Neutral Grey only in the gaps. Then 50:50 mix of VMC Sky Grey: VMC White, and final edge highlight of pure VMC White.
- Skin is VMC Flat Flesh, than VGC Fleshtone Shade Wash, with final highlights of the Flat Fleah again.
- Hair was VMC Flat Earth, then VMC Gold Brown, then VMC Flat Yellow, and finally VMC Sand Yellow.

I could possibly quicken then process by simplifying the gun painting, but i do like the way the white comes out, so i think ill leave it

[Crushar]

That black looks great! Actually it all looks great! Excellent job.

[Scarecrow]

To those of you who do commissions, what would be a reasonable rate to charge for this level of painting per model? I was thinking maybe $15 for a 25mm base and $20 for a 40mm based model.

Not sure ill go the commission painting route, so just figuring out if at the very least it could fund me enough to remain dollar neutral in the hobby...

[Arachas]

All I know is that it's a lot of work for 15 or 20 bucks dude.

[Section9]

To those of you who do commissions, what would be a reasonable rate to charge for this level of painting per model? I was thinking maybe $15 for a 25mm base and $20 for a 40mm based model.

Not sure ill go the commission painting route, so just figuring out if at the very least it could fund me enough to remain dollar neutral in the hobby...

Commission painters I know charge $15 an hour. If you could knock that mini out in one hour of painting, not counting drying time, then you're reasonable.

Generally, painted models go for retail on the fleabay market, and unpainted go for half retail. And that's assuming that people are going to strip the models.

[Scarecrow]

Got a couple of CrazyKoalas painted up tonight in about 2-2.5 hours. This photo showed me just how shit those highlights on the heads were in particular, so i have been back and touched them up since this photo.

[Arachas]

Really nice! I love the bases, too.

[Scarecrow]

I suprised myself with the bases. If people are interested, i could be persuaded to do a construction and painting tutorial if its of intetest.

[Mob of Blondes]

Zip ties, mesh and what more? Slices of plastic tube?

[Scarecrow]

Plastic tube from cotton buds

[Scarecrow]

Heres a couple more bases. Having a lot of fun making these. Still trying to get the hang of using weathering powders better.

[Scarecrow]

Not the best pic, or painting for that matter, but ive finished up the Moran Massai and touched up the Koalas.

[VisOne]

Well as your full well know Scarecrow from the Aus Infinity Facebook page I picked up some cheap Nomads and I've had a crack recreating a colour scheme similar to what you have done so far but I have to say without airbrush wide and top angle highlighting they just don't look good like yours.

Ohh and a little feed back on the Moran Massai the scheme looks fine on him but for me its the face that is letter the overall job down. Maybe lightening it up just a touch might help?

[Scarecrow]

I could try a further highlight, but I quite liked the skin tone... probably looks better in person than the photo suggests... i hate skin tones as it is, and this dark one was harder then i anticipated... I nearly just painted this guy with the same skin tone as the Alguacil

[Section9]

I could try a further highlight, but I quite liked the skin tone... probably looks better in person than the photo suggests... i hate skin tones as it is, and this dark one was harder then i anticipated... I nearly just painted this guy with the same skin tone as the Alguacil

I hate painting dark skintones, too, though it's because I gotta paint the eyes! (I normally don't paint eyes)

Maybe if I woulda painted that whole 200+model Empire army in Warhammer Fantasy I would have a better grasp of eyes...

[Scarecrow]

The gaps between the bases and zip ties are really bugging me, so i think ill go through with some milliput to make them neater...

[Taylor]

Man.. I think I need to get a new bottle of VGC hot orange... mine is just not turning out like the ones you guys are using.

[VisOne]

Man.. I think I need to get a new bottle of VGC hot orange... mine is just not turning out like the ones you guys are using.

I'm not going straight from the bottle; nor using just that particular colour which might be why your not seeing the same results. I'm sure Scarecrow is the same.

Scarecrows work is leaps ahead of mine though but you can see which bits and pieces I liked about his speed painting and thought I could emulate without an airbrush.

[Taylor]

Well, my orange is coming out kinda chunky and milky at the same time.. I've added thinner to it, and even put a piece of pewter in there so when I shake it, it gets all agitated, to no avail. You guys don't have the same problem, I'm assuming. How are you achieving such brilliant oranges?

[Scarecrow]

I have been painting straight from the dropper bottle, as i was being lazy, and didnt want to have to do multiple layers

[Scarecrow]

I think the important thing is to have a darker red as a shadow colour, as it will make the orange look brighter

[Taylor]

Hmmm. I'll have to give that a try!

[Section9]

I think the important thing is to have a darker red as a shadow colour, as it will make the orange look brighter

Definitely!

I use P3 Sanguine Base under my reds and it adds a lot of intensity to the color. If I was painting orange, I'd start with an orangy mid-red like P3's Khador Red base. (I like the P3 colors for reds and oranges, the liquid pigment helps make layering less obvious, without two-brush blending.

[Pacific]

Love the colour combination, works very well! Nice highlighting as well, the overall effect is very impressive.

[Scarecrow]

Been busy building real life terrain, so not a lot of hobby stuff done, but heres my latest... A nearly finished McMurrough. Still have his weapons to finish.... Also thinking i need to paint his kilt bag in White also.

Keep in mind this is a reasonably quick paint job, to get my Nomads on the table faster then ive been painting my Tohaa, so there is a fair bit of sloppy painting... That, and ive not been painting at a desk, so my hands are shaky not being able to support my elbows...